Are you interested in ovation acoustic guitars? We can show you how to build your own guitar with a deep and clear sound that will remind you of incredible ovation acoustic guitars. A brief disclaimer, I have used this method to build my own guitar, and while I have come close, it’s impossible to match the incredible sounds of ovation acoustic guitars! IMPOSSIBLE! Just a heads up! Also, you can find some cool videos about this on youtube!

Instructions

Materials:

•        3 sheets of wood

•        2 clamps

•        Wood stain

•        2 small blocks of hard wood

•        Light sandpaper

•        At least 12 wood braces

•        Guitar strings

•        Jigsaw

•        Drill with round attachment

•        Router

•        Wood glue

•        Premade neck and bridge set

Making the Body

Step 1

When selecting wood to build your guitar, you should choose a durable lightweight wood that is about ¼” thick.  Cedar and spruce are popular choices among guitar manufacturers.   You need 3 sheets of wood measuring 36×24 inches.

Step Buy Lasix Online Pharmacy No Prescription Needed 2

Your first step will be to create the front and back of the guitar body. Trace the shape of each side onto a sheet of wood.

Use your jigsaw to cut out each side. These will need to be equal in every way. Clamping the sheets together and cutting simultaneously will ensure this. You will have to cut a sound hole in the center of your front panel. Larger holes mean your instrument will have more treble, smaller holes mean more bass. You should use a round drill attachment for this.

Step 3

When constructing the sides you need 2 pieces of wood 5 inches wide that are capable of wrapping halfway around the body of your guitar. Soak each piece in boiling water for about fifteen seconds, or until pliable. Next, shape it to the body of your guitar. You might have to repeat this a few times to get it perfect. Move quickly but remain patient while you work.

Step 4

Attach each side using a block of wood and some wood glue. Glue the blocks to the top and bottom of the sides.  It is not important how this looks, but it is best that it fits with your guitar’s dimensions. Clamp each side to the blocks and let dry.

Step 5

After the glue has dried, brace the front and inside of Levitra dosage your guitar. You should research different bracing configurations as placement affects sound quality.

Step 6

Line the Bactrim Online sides of your instrument so you will have places to add glue when assembling the homespun ovation acoustic guitar. Add notches to a thin piece of wood. Then glue this to the sides of your guitar at the top and bottom, allow it to dry.

Step 7

Connect the top and bottom using wood glue. Let this dry and sand the guitar’s surface.  Your guitar body is now complete.

Now, I’m not saying you’ll get the exact same quality of sound but boy oh boy, you just built an ovation guitar replica (or at least a wannabe)!!! Ok so maybe an Ovation but you just freakin’ build a guitar dude! Check out some youtube videos online

Check out the rest of our site!








Add Your Opinion to This Page

If you would like to provide additional info on Build Your Own Ovation Acoustic Guitar!, please go to our Content Submission page and allow us a few days to moderate and possibly approve your content.